[syslinux] SYSLINUX 4.00 2010-06-28 EDD Load error - Boot error

[Helmut Hullen]

Hallo, H. Peter,

Du meintest am 29.06.10:

> I have put a serial port debugging build at:

> http://www.zytor.com/~hpa/syslinux/syslinux-4.01-pre91.tar.gz

> Use a null modem cable to connect the test system to the logging
> host. You can use any common terminal program to log the output on
> the other end; set the terminal program for 115200-N81.

> I tend to use "screen" on a Linux box.  If your serial port on the
> logging host is /dev/ttyS0, then run:

> screen -L /dev/ttyS0 115200

Done - it "opens" a file "screenlog.0".


> Note: this build should produce *lots* of output.  If it doesn't,
> something is wrong.

Something is wrong - starting the T22 leads to the 3 lines error  
messages, but "screenlog.0" receives no byte.

I have used the actual "isolinux.bin" - has it implemented the serial  
routines?

Viele Gruesse!
Helmut