[syslinux] PXE booting

[Luis.F.Correia]

My pxelinux config file:

-----------
default os

label os
	kernel memdisk
	append initrd=client.ima
-----------

Messages from PXELINUX:

-----------
Pxelinux 2.00 (C) hpa...
UNDI data segment at	009b020
UNDI data segment size	3090
UNDI code segment at	009e0b0
UNDI code segment size	14e0

PXE entry point found (we hope) at 9e0b:0106
( correct IP informations ...)
TFTP prefix:
Trying to load default:
Loading memdisk
Loading client.ima
Ready.
-----------

And as i said before, it just sits there...
If you want I can test with a debug version, if you tell me where I can find
it.

-----Original Message-----
From: H. Peter Anvin [mailto:hpa at zytor.com] 
Sent: Monday, January 06, 2003 11:26 AM
To: Luis.F.Correia
Cc: syslinux at zytor.com
Subject: Re: [syslinux] PXE booting


Luis.F.Correia wrote:
> Hi!
> 
> I have been using pxelinux with memdisk to boot our workstations with 
> our custom floppy, which is a MSDOS boot disk (actually it is win98)
> 
> On one of the PC's I'm testing, a Fujitsu-Siemens which has an AMDtek 
> based on-board network card and when PXE is activated, it gets an IP 
> from the DHCP, then it finds the TFTP server, downloads pxelinux.0, 
> executes it which causes the floppy to be downloaded, the file is 
> transfered but it just stays there.
> 
> the PXE implementation is:
> 
> BootManage UNDI PXE-2.0 (build 083)
> BootManage PXE-2.0 PROM 1.0 AN983 3.00 SDK 3.0/083 (OEM73)
> (C) bootix gmbh , Licensed to FSC
> 
> Of course it boots with 2000 RIS....
> 
> Besides a broken bios implementation, is there something i can try?
> 

What does your PXELINUX config file look like?  Any messages from PXELINUX?

	-hpa