[syslinux] SYSLINUX.CFG not readed

[Rafael Vallejo]

Hello list.

I have configured a Linux box for booting from a Compact Flash instead of a
Hard Disk, this is an IDE CF, Syslinux is on the MBR because it loads, when
I put the the kernel file named as linux as it expects i load it but when I
rename it expecting it to load the SYSLINUX.CFG it does not load the menu as
I would like, I will put two images on that Compact flash in order to boot
from two diferent configurations

Here is a listing of my Compact Flash

F:\>dir
 Volume in drive F is CE
 Volume Serial Number is 3565-18E8

 Directory of F:\

05/31/1994  05:22 AM            54,645 COMMAND.COM
09/30/1993  04:20 AM            29,136 HIMEM.SYS
03/22/2004  01:02 PM               102 AUTOEXCE.BAT
04/23/2004  01:48 PM        21,374,396 KYPUS.IMG
04/28/2004  10:43 AM    <DIR>          otros
04/14/2004  07:09 AM            32,225 loadlin.exe
04/27/2004  10:48 AM               124 AUTOEXLI.bat
02/22/2004  09:31 PM             9,428 isolinux.bin
03/22/2004  10:46 AM                94 CONFIG.SYS
03/01/2003  05:11 PM            97,219 EBOOT.BIN
10/22/2002  03:27 PM            98,076 LOADCEPC.EXE
12/11/2003  01:58 PM        17,715,335 nk.bin
03/06/2003  09:16 PM            24,347 SBOOT.BIN
03/22/2004  12:56 PM    <DIR>          Settings
04/28/2004  02:27 PM             8,184 LDLINUX.SYS
04/27/2004  10:21 AM           720,425 vmlinuz
04/28/2004  03:06 PM               209 isolinux.cfg
              15 File(s)     40,163,945 bytes
               2 Dir(s)      82,464,768 bytes free

F:\>

Here I have the content of my SYSLINUX.CFG file



DEFAULT KypusLX
PROMPT 1
TIMEOUT 600

LABEL KypusLX
 KERNEL vmlinuz
 APPEND ramdisk_size=73000 ro initrd=KYPUS.IMG root=/dev/ram

LABEL KypusCE
 KERNEL vmlinux
 APPEND ramdisk_size=73000 rw initrd=KYPUS.IMG root=/dev/ram

Any Idea?

Regards

Rafael