[syslinux] Menu help
Brown, Larry
Larry.Brown at nielsenmedia.com
Wed Aug 25 07:39:05 PDT 2004
Are the parameters case sensitive? I have...
label test
KERNEL vmlinuz
APPEND initrd=initrd.img ramdisk=8192 rw root=/dev/ram
init=/etc/rc/rc.custom
You have lower case "kernel" and "append"...
The rest of what your default file shows looks like it should at least get
the correct kernel name.
Larry S. Brown
Network Engineer
Nielsen Media Research
-----Original Message-----
From: syslinux-bounces at zytor.com [mailto:syslinux-bounces at zytor.com]On
Behalf Of Stewart Campbell
Sent: Tuesday, August 24, 2004 8:12 PM
To: syslinux at zytor.com
Subject: [syslinux] Menu help
Hi
We have setup a TFTP server on a server running Fedora Core 2. We have
a network/router appliance that acts as our DHCP server. The DHCP
server gives our workstations an IP address then directs them to our
TFTP server looking for the boot file named pxelinux.0 . On the TFTP
server we have a directory called tftpboot in this directory we have the
following files:
- memdisk
- pxelinux.0
- several dos floppy images
- pxelinux.cfg <this is a directory>
All the files and directories under tftpboot have permissions of 777.
In the pxelinux.cfg directory we have a file called default with a
simple menu. The contents of the file are:
prompt 1
default ami
label ami
kernel memdisk
append initrd=ami_62_144.img
label intel
kernel memdisk
append initrd=intel_10-100.img
When the desktop systems connect they receive an IP address from the
DHCP server then they get directed to the TFTP server and we receive the
following information on screen:
IP = 10.0.0.223:10.0.0.10:10.0.0.1:255.255.0.0
TFTP Prefix:
Trying to load: pxelinux.cfg / 01-00-11-11-17-cc-eb
Trying to load: pxelinux.cfg / 0A0000DF
Trying to load: pxelinux.cfg / 0A0000D
Trying to load: pxelinux.cfg / 0A0000
Trying to load: pxelinux.cfg / 0A000
Trying to load: pxelinux.cfg / 0A00
Trying to load: pxelinux.cfg / 0A0
Trying to load: pxelinux.cfg / 0A
Trying to load: pxelinux.cfg / 0
Trying to load: pxelinux.cfg / Default
Could not find Kernal image : linux
boot:
If I type in the commands manually i.e. memdisk initrd=diskimage.img the
floppy images loads straight away with no issues. We have tried for a
couple of days to get the menu working with no success, any help that
could be given would be greatly appreciated.
/Regards/
Stewart Campbell
*SCCB Solutions Pty Ltd*
21 Corvus Drive
CASHMERE QLD 4500
PO Box 5634
BRENDALE QLD 4500
Phone: +61 (0)7 3882 1597
Fax: +61 (0)7 3882 1595
Mobile: +61 (0)414 292 398
E-mail: stewart.campbell at sccb.com.au
<mailto:stewart.campbell at sccb.com.au>
ICQ: 176774504
Web: www.sccb.com.au <http://www.sccb.com.au>
_______________________________________________
SYSLINUX mailing list
Submissions to SYSLINUX at zytor.com
Unsubscribe or set options at:
http://www.zytor.com/mailman/listinfo/syslinux
Please do not send private replies to mailing list traffic.
More information about the Syslinux
mailing list