[syslinux] SYSLINUX 3.10-pre15
Curtis Doty
Curtis at GreenKey.net
Sat Aug 27 21:06:14 PDT 2005
H. Peter Anvin wrote:
> Curtis Doty wrote:
>
>> Curtis Doty wrote:
>>
>>> However, LOCALBOOT -1 and LOCALBOOT 0 don't work the same as they
>>> did for me in 3.07. :-(
>>>
>>> 3.07:
>>> LOCALBOOT -1 apears to work as I have a hard disk listed in bios
>>> boot order after the net card.
>>> LOCALBOOT 0 also works fine by booting the disk as specified.
>>>
>>> 3.10-pre15:
>>> LOCALBOOT -1 causes the system to reboot.
>>> LOCALBOOT 0 hangs after "Booting from local disk..."
>>>
>>> Also FYI, in the 3.07 tests that *work*, the line immediately
>>> following "Booting from local disk..." is: "PXE-M0F: Exiting
>>> Broadcom PXE ROM." Then of course, "GRUB Loading stage2..." :-)
>>
>>
>> I just realized, all my tests above were indeed with a secondary
>> menu.32 from 3.07. I just tested with
>> http://www.zytor.com/~hpa/menuhang-test/pxelinux.0 and *both*
>> LOCALBOOT -1 and 0 hang after "Booting from local disk..."
>
>
> Can you try changing:
>
> %assign USE_PXE_PROVIDED_STACK 0 ; Use stack provided by PXE?
>
> ... on line 55 of pxelinux.asm to a 1 and try rebuilding, to see if
> that makes any difference?
Just getting to this...but with the latest 3.11-pre6. The problem of
LOCALBOOT 0 goes away with USE_PXE_PROVIDED_STACK 1. :-) And I've
confirmed it still hangs with the default value. Hope that helps. For
now, guess I'll have to keep a patch for this platform.
../C
More information about the Syslinux
mailing list