[syslinux] Setting up a Pxe Server with udhcpc?

[Carl Karsten]

I have never heard of DNSMasq, but what you posted sounds reasonable. I assume by 
now you have tried it - did it work?

Not sure why you would need both the name and IP.

Not sure if you want the / at the front of /pxelinux.0

Carl K

Andrew Balmos wrote:
 > Thanks for the help!, I was able to get DNSMasq running on the router
 > and I am now using that...
 >
 > Correct me if I am wrong but all I need to do get pxelinux working is
 > to edit the DNSMasq config file and add:
 > dhcp-boot=/pxelinux.0,debian,216.221.66.146
 >
 > Where debian is the name of the system running the tftp server and
 > 216.221.66.146 is the IP address of the tftp server.
 >
 > Andrew
 >
 > On 6/3/05, Carl Karsten <carl at personnelware.com> wrote:
 >
 >>>server for the pxe server... I have been searching for some sort of
 >>>document or hint as how to set this up, I could not find anything.
 >>
 >>Here are the steps to setup everything and then some - so pull out the parts you
 >>need: http://ubuntulinux.org/wiki/LocalNetInstall
 >>
 >>Let me know if anything on that page needs help.
 >>
 >>Carl K
 >>
 >
 >
 >