[syslinux] blame-transfer protocol on PXE boot - followup and closure
Jim Cromie
jcromie at divsol.com
Mon May 16 17:20:02 PDT 2005
FYI,
I solved this by doing this during shutdown.
ethtool -s eth0 wol d
evidently the NSC driver doesnt fully reinitialize the driver in all cases.
Jim Cromie wrote:
> hpa, etal,
>
> pxelinux works great from a push of the reset button.
> machine boots normally.
>
> However, after i issue 'reboot' command, my box fails to find the tftp
> server during reboot.
> This looks to be happening before pxelinux has any chance to participate,
> so it cannot be to blame.
>
> Im seeking corroboration here before I go badgering the bios-provider
>
> here's the relevant pxelinux.cfg/default, and what the bios puts out
> to serial
>
> SERIAL 0 19200
> CONSOLE 0
> DEFAULT menu.c32
>
>
> NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03
> Copyright (C) 2002, 2003 National Semiconductor Corporation
> All rights reserved.
>
> Pre-boot eXecution Environment PXE-2.0 (build 082)
> Copyright (C) 1997-2000 Intel Corporation
>
>
> CLIENT MAC ADDR: 00 00 24 C2 46 C8
> CLIENT IP: 192.168.42.100 MASK: 255.255.255.0 DHCP IP: 192.168.42.1
> PXE-E11: ARP timeout
> PXE-E11: ARP timeout
> PXE-E38: TFTP cannot open connection
> PXE-M0F: Exiting MacPhyter PXE ROM.
>
>
>
> thanks in advance
> jimc
>
> _______________________________________________
> SYSLINUX mailing list
> Submissions to SYSLINUX at zytor.com
> Unsubscribe or set options at:
> http://www.zytor.com/mailman/listinfo/syslinux
> Please do not send private replies to mailing list traffic.
>
More information about the Syslinux
mailing list