[syslinux] Cant PXE boot DOS image

[Gustavo Guillermo Pérez]

El Sábado, 5 de Noviembre de 2005 06:41, Jon Keller escribió:
> My system is hanging up when attempting to boot a bootable floppy disk
> image Does the following info tell any story as to what's happening?
If your image really boots, try on other PC, if boots on other PC, check your 
problem on the bios settings I was having a temporary problem like that in 
one of my network stations, but was gone while change the boot order and put 
1st network :-|
does not make sense, but.....
> Thanks.
>
> LABEL dosdiskimage
> KERNEL memdisk
> APPEND keeppxe initrd=dos.img floppy
>
> Loading dos.img .............
> Ready.
> MEMDISK 3.11 2005-09-02
> e820: 0000000000000000 000000000009fc00 1
> e820: 000000000009fc00 0000000000000400 2
> e820: 00000000000e0000 0000000000020000 2
> e820: 0000000000100000 0000000009ef0000 1
> e820: 0000000009ff0000 0000000000008000 3
> e820: 0000000009ff8000 0000000000008000 4
> e820: 00000000fff80000 0000000000080000 2
> Ramdisk at 0X09ef4000, length 0x000dbbe6
> Moving compressed data from 0x09ef4000 to 0x09dac400
> gzip image: decompressed addr 0x09e88000, len 0x00168000: ok
> command line initrd=dos.img BOOT_IMAGE=memdisk
> Disk is floppy 0,1440 K, C/H/S = 80/2/18
> Total size needed = 1905 bytes, allocating 2K
> Old dos memory at 0x9fc00 (map says 0x9fc00), loading at 0x9f400
> 1588: 0xffff 15E801: 0x3c00 0x08e8
> INT 13 08: Sucess, count = 1, BPT = e086:43af
> old: int13 = f000eed2 int15 = f000f859
> new: int13 = 9f400008 int15 = 9f400290
> Loading boot sector ... booting...
> Starting..
> (at this point the system hangs here)

-- 
Gustavo Guillermo Pérez
Compunauta uLinux
www.compunauta.com