[syslinux] problem booting msdos with memdisk

[Gustavo Guillermo Pérez]

El Lunes, 28 de Agosto de 2006 14:26, Uli Raich escribió:
> Hi all,
> I try to boot an msdos system using pxelinux and memdisk on my PC engines
> Wrap-2.c card and I have problems with it This is what I see:
> PXELINUX 3.11 Debian-2006-03-16  Copyright (C) 1994-2005 H. Peter A
> boot: msdos
> Loading memdisk....
> Loading images/msdos/msd622bd.dosim.........................
> Ready.
> dp83815: Setting full-duplex based on negotiated link capability.
> MEMDISK 3.11   Copyright 2001-2005 H. Peter Anvin
> e820: 0000000000000000 00000000000a0000 1
> e820: 00000000000f0000 0000000000010000 2
> e820: 00000000fff00000 0000000000100000 2
> e820: 0000000000100000 0000000007f00000 1
> Ramdisk at 0x07d61000, length 0x00168000
> command line: initrd=images/msdos/msd622bd.dosim BOOT_IMAGE=memdisk
> Disk is floppy 0, 1440 K, C/H/S = 80/2/18
> Total size needed = 1899 bytes, allocating 2K
> Old dos memory at 0x9fc00 (map says 0xa0000), loading at 0x9f400
> 1588: 0xffff  15E801: 0x3c00 0x06d6
> INT 13 08: Failure, assuming this is the only drive
> old: int13 = f000ac5e  int15 = f000a60a
> new: int13 = 9f400008  int15 = 9f400290
> Loading boot sector... booting...
>
> from then on nothing happens.
> Can this be a BIOS problem (PC engines uses its own TiniBios) or what else
> may I try? Thanks Uli
It happens to me with some hardware, like using sis900 eth. card and sometimes 
with no real floppy unit on older compaqs.

:)
-- 
Gustavo Guillermo Pérez
Compunauta uLinux
www.compunauta.com