[syslinux] pxelinux / memdisk / afud408 freeze.
Lindgren Daniel
daniel.lindgren at tullverket.se
Thu Aug 23 23:43:08 PDT 2007
OK, I missed that it's a Win95-based image. Please ignore previous post.
> -----Ursprungligt meddelande-----
> Från: Lindgren Daniel
> Skickat: den 24 augusti 2007 08:41
> Till: 'For discussion of SYSLINUX and tftp-hpa'
> Ämne: SV: [syslinux] pxelinux / memdisk / afud408 freeze.
>
> I'm guessing that the image you are booting via memdisk is
> FreeDOS-based? I've had similar problems with FreeDOS disks
> images and firmware updates. If that's the case, try copying
> the update programs to a MS-DOS 6.22 image instead.
>
> > -----Ursprungligt meddelande-----
> > Från: syslinux-bounces at zytor.com
> > [mailto:syslinux-bounces at zytor.com] För Andrew Stuart
> > Skickat: den 24 augusti 2007 07:11
> > Till: For discussion of SYSLINUX and tftp-hpa
> > Ämne: [syslinux] pxelinux / memdisk / afud408 freeze.
> >
> > Has anyone had a problem with afud408 (Award flash program)
> freezing
> > the system when ran from memdisk?
> > The freeze occurs when just running afud408 (not attempting
> to update
> > bios, although it freezes then as well.)
> >
> > I was using pxelinux/memdisk 3.36, I upgrade to 3.51, and also fell
> > back to 2.11 all have the same issue.
> >
> > I have tried all the switches for memdisk that I saw posted on the
> > memdisk webpage (non wiki). raw/bigraw caused the image to freeze
> > before even booting. (frozen cursor before loading the boot
> sector?).
> > The disk image is a Windows 95 boot image that I used winimage to
> > expand to 2.88MB. I use this image for all my bios upgrade needs.
> >
> > This seems to occur on a large amount of MSI's latest offerings (w/
> > award bios) (Specifically: 945gm2, 945gm3 and g965m). I
> used this same
> > image on a Dell laptop for giggles, and it worked fine (it spit out
> > the usage menu).
> >
> > At this point I am sure it's a bios/pxe issue, but does anyone have
> > any suggestions before I try taking the issue up with MSI? Any idea
> > how I can troubleshoot this further, so that I can give
> them specifics
> > as to why it locked up?
> >
> > If it isn't clear, this on 10+ different systems, different
> hardware,
> > different configurations, all hardware has been tested to be good.
> >
> > Thanks in advance,
> >
> > -Andrew
> >
> > _______________________________________________
> > SYSLINUX mailing list
> > Submissions to SYSLINUX at zytor.com
> > Unsubscribe or set options at:
> > http://www.zytor.com/mailman/listinfo/syslinux
> > Please do not send private replies to mailing list traffic.
> >
> >
> >
More information about the Syslinux
mailing list