[syslinux] Headless operations
Miller, Shao
Shao.Miller at yrdsb.edu.on.ca
Sun Apr 5 22:31:16 PDT 2009
Make that three of the same label.
Try this simple extlinux.cfg file:
DEFAULT foo
LABEL foo
KERNEL /boot/Fedora-10/isolinux/vmlinuz
APPEND initrd=/boot/Fedora-10/isolinux/initrd.img ro headless vnc
vncpassword=install noipv6 lang=en_US keymap=us ip=dhcp
- Shao Miller
-----Original Message-----
From: Miller, Shao
Sent: Monday, April 06, 2009 01:28
To: 'Chris at infogreat.com'
Cc: 'For discussion of Syslinux and tftp-hpa'
Subject: RE: [syslinux] Headless operations
I don't think you should have two of the same label down there, Chris.
I see two of "LABEL ins-F10-headless". Try removing the second section,
perhaps, or snipping it away to some other file for backup. - Shao
-----Original Message-----
From: syslinux-bounces at zytor.com [mailto:syslinux-bounces at zytor.com] On
Behalf Of Chris Miller
Sent: Monday, April 06, 2009 01:19
To: 'For discussion of Syslinux and tftp-hpa'
Subject: Re: [syslinux] Headless operations
Hi Geert,
There are no error messages. The request is simply ignored and the
sequence
continues as though I hadn't indicated anything.
The EXTLinux.conf is as follows:
========================================================================
====
=======
DEFAULT /boot/extlinux/vesamenu.c32
#DEFAULT ins-F10
DISPLAY /boot/extlinux/boot.msg
F1 /boot/extlinux/boot.msg
F2 /boot/extlinux/options.msg
F3 /boot/extlinux/general.msg
F4 /boot/extlinux/param.msg
F5 /boot/extlinux/rescue.msg
menu title Kit
menu background /boot/extlinux/splash.jpg
menu color border 0 #ffffffff #00000000
menu color sel 7 #ffffffff #ff000000
menu color title 0 #ffffffff #00000000
menu color tabmsg 0 #ffffffff #00000000
menu color unsel 0 #ffffffff #00000000
menu color hotsel 0 #ff000000 #ffffffff
menu color hotkey 7 #ffffffff #ff000000
menu color scrollbar 0 #ffffffff #00000000
LABEL ins-F10
MENU LABEL ^Install Fedora-10 or Upgrade an existing system
KERNEL /boot/Fedora-10/isolinux/vmlinuz
APPEND initrd=/boot/Fedora-10/isolinux/initrd.img ro
LABEL ins-F10-headless
MENU LABEL ^Headless Install or Upgrade Fedora-10 (Passive, Dynamic)
KERNEL /boot/Fedora-10/isolinux/vmlinuz
APPEND initrd=/boot/Fedora-10/isolinux/initrd.img ro headless vnc
vncpassword=install noipv6 lang=en_US keymap=us ip=dhcp
LABEL ins-F10-headless
MENU LABEL ^Headless Install or Upgrade Fedora-10 (Active(edit),
Dynamic)
KERNEL /boot/Fedora-10/isolinux/vmlinuz
APPEND initrd=/boot/Fedora-10/isolinux/initrd.img ro headless vnc
vncconnect=<con ip> noipv6 lang=en_US keymap=us ip=dhcp
LABEL ins-F10-headless
MENU LABEL ^Headless Install or Upgrade Fedora-10 (Passive,
Static(edit))
KERNEL /boot/Fedora-10/isolinux/vmlinuz
APPEND initrd=/boot/Fedora-10/isolinux/initrd.img ro headless vnc
vncpassword=install noipv6 lang=en_US keymap=us ip=<target ip>
netmask=<netmask> gateway=<gateway ip> dns=<dns ip>
hostname=<name.domains.tld>
LABEL ins-F10-headless
MENU LABEL ^Headless Install or Upgrade Fedora-10 (Active(edit),
Static(edit))
KERNEL /boot/Fedora-10/isolinux/vmlinuz
APPEND initrd=/boot/Fedora-10/isolinux/initrd.img ro headless vnc
vncconnect=<con ip> noipv6 lang=en_US keymap=us ip=<target ip>
netmask=<netmask> gateway=<gateway ip> dns=<dns ip>
hostname=<name.domains.tld>
LABEL F10-Rescue
MENU LABEL ^Rescue an existing system
KERNEL /boot/Fedora-10/isolinux/vmlinuz
APPEND initrd=/boot/Fedora-10/isolinux/initrd.img ro mode=rescue
========================================================================
====
=======
Chris.
Fill what's empty, empty what's full, and scratch where it itches.
Life is a journey, not a destination ...
> -----Original Message-----
> From: syslinux-bounces at zytor.com
> [mailto:syslinux-bounces at zytor.com] On Behalf Of Geert Stappers
> Sent: Sunday, April 05, 2009 9:56 PM
> To: syslinux at zytor.com
> Subject: Re: [syslinux] Headless operations
>
> Op 20090405 om 17:12 schreef H. Peter Anvin:
> > Chris Miller wrote:
> > > Hi Folks,
> > >
> > > I'm interested in "headless" installation. If I use GRUB, then I
> > > provide arguments to the kernel of things like "headless vnc
> > > vncpassword=whoopie ip=dhcp" GRUB passes this on to
> ISOLinux, which
> > > manages the CD and subsequently the installation.
> > >
> > > Shouldn't I be able to do exactly the same thing with
> EXTLinux? I ask,
> > > because, as you might suspect, I can't get this to work...
> > >
> >
> > I am utterly unclear of what you mean with "Grub passes this on to
> > ISOLINUX"... there is no mechanism like that to "pass things on" to
> > ISOLINUX.
> >
> > The first question is probably: where are you booting from (since
> > you're apparently not booting from a CD?)
>
> And providing even more information will bring us[1] a solution.
> So please show the configuration file that is being used and
> tell how it behaves (what error messages appear)
>
>
> Cheers
> Geert Stappers
>
> Footnote
> [1] 'us' meaning the Syslinux project community
>
> _______________________________________________
> Syslinux mailing list
> Submissions to Syslinux at zytor.com
> Unsubscribe or set options at:
> http://www.zytor.com/mailman/listinfo/syslinux
> Please do not send private replies to mailing list traffic.
>
>
_______________________________________________
Syslinux mailing list
Submissions to Syslinux at zytor.com
Unsubscribe or set options at:
http://www.zytor.com/mailman/listinfo/syslinux
Please do not send private replies to mailing list traffic.
More information about the Syslinux
mailing list