[syslinux] [patch] ~420 seconds in cpu_detect
Jim Cromie
jim.cromie at gmail.com
Fri Apr 15 13:19:32 PDT 2011
On Thu, Apr 14, 2011 at 1:06 PM, Erwan Velu <erwanaliasr1 at gmail.com> wrote:
> Thanks Jim for your inputs.
>
> I worked on it a little bit, can you test the beta3 I'm preparing ?
>
> You can find it here : http://pubz.free.fr/hdt/
>
> Cheers,
>
Sure.
img didnt work for me, hung after ...ready
using this cfg entry. I havent yet looked at docs to figure out what
part of entry Ive botched, hints welcome
LABEL HDT-0.5-beta3
MENU LABEL ^5 HDT-0.5-beta3
KERNEL hdt-0.5.0-beta3.img
APPEND console=ttyS0,115200n8 reboot=bios
I tested the c32 module,
after dropping it into /var/lib/tftpboot/
containing 4.04 pre17
Vendor looks right, (no big delay either)
x86_64 looks right,
cache sizes still missing.
Model ID disagrees with /proc/cpuinfo (dont know which is correct)
┌────── Main Menu ──────┐┌────────────────── Main Processor ─────────────────┐
│ PCI Devices(11) >││ Vendor : National Semiconductor │
│ Disks ( 1) >││ Model : Geode(TM) Integrated Processor by │
│ Memory >││ CPU Cores : 1 │
│ Processor >││ L1 Cache : 0K + 0K (I+D) │
│ PXE >││ L2 Cache : 0K │
├───────────────────────┤│ Family ID : 5 │
│ Syslinux >││ Model ID : 4 │
│ Summary >││ Stepping : 0 │
├───────────────────────┤│ SMP : No │
│ Switch to CLI ││ X86_64 : No │
│ Dump to tftp ││ Hw Virt. : No │
│ About >││ Flags : fpu tsc msr cx8 cmov mmx │
│ Reboot │└───────────────────────────────────────────────────┘
│< Exit │
└───────────────────────┘
THe other thing I noticed was a stray ']' before 'No; in gPXE
Detected: line below.
┌────── Main Menu ──────┐┌─────────────────────── PXE ───────────────────────┐
│ PCI Devices(11) >││ Manufacturer : National Semiconductor Corporat │
│ Disks ( 1) >││ Product : DP83815 (MacPhyter) Ethernet Co │
│ Memory >││ MAC Address : 00:00:24:c2:46:c8 │
│ Processor >││ IP Address : 192.168.1.108 │
│ PXE >││ gPXE Detected: ]No │
├───────────────────────┤└───────────────────────────────────────────────────┘
│ Syslinux >│
My cursor keys dont work right, so I cant browse all data, but thats
not hdt specific.
It may be only on this laptop, havent tried another box.
More information about the Syslinux
mailing list