[syslinux] [PATCH] nictype.c32: PXELINUX module to display UNDI NIC bus type...
Shao Miller
sha0.miller at gmail.com
Thu Nov 22 17:59:24 PST 2012
Applies to Syslinux 4.06. Attached, below, and available at:
Repository: git://git.zytor.com/users/sha0/syslinux.git
Branch: nictype
- Shao Miller
-----
From 2764e260e12d9769e3b699e4213b9a164e64924a Mon Sep 17 00:00:00 2001
From: Shao Miller <sha0.miller at gmail.com>
Date: Thu, 22 Nov 2012 20:43:25 -0500
Subject: [PATCH] nictype.c32: PXELINUX module to display UNDI NIC bus
type...
...and optionally load a config-file based on the PCI VENdor and DEVice IDs.
Usage: nictype.c32 [--config]
--config will try to load a config-file with the name VVVVDDDD, where VVVV
is the PCI VENdor code and DDDD is the PCI DEVice code, both for the NIC
Signed-off-by: Shao Miller <sha0.miller at gmail.com>
---
com32/modules/Makefile | 3 +-
com32/modules/nictype.c | 115
++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 117 insertions(+), 1 deletion(-)
create mode 100644 com32/modules/nictype.c
diff --git a/com32/modules/Makefile b/com32/modules/Makefile
index f110e58..10c6688 100644
--- a/com32/modules/Makefile
+++ b/com32/modules/Makefile
@@ -24,7 +24,8 @@ MODULES = config.c32 ethersel.c32 dmitest.c32
cpuidtest.c32 \
meminfo.c32 sdi.c32 sanboot.c32 ifcpu64.c32 vesainfo.c32 \
kbdmap.c32 cmd.c32 vpdtest.c32 host.c32 ls.c32 gpxecmd.c32 \
ifcpu.c32 cpuid.c32 cat.c32 pwd.c32 ifplop.c32 zzjson.c32 \
- whichsys.c32 prdhcp.c32 pxechn.c32 kontron_wdt.c32 ifmemdsk.c32
+ whichsys.c32 prdhcp.c32 pxechn.c32 kontron_wdt.c32 ifmemdsk.c32 \
+ nictype.c32
TESTFILES =
diff --git a/com32/modules/nictype.c b/com32/modules/nictype.c
new file mode 100644
index 0000000..b2a1c2a
--- /dev/null
+++ b/com32/modules/nictype.c
@@ -0,0 +1,115 @@
+/*
------------------------------------------------------------------------- *\
+ *
+ * Copyright 2012 Shao Miller <sha0.miller at gmail.com> - All Rights
Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
+ * Boston MA 02110-1301, USA; either version 2 of the License, or
+ * (at your option) any later version; incorporated herein by reference.
+ *
+\*
------------------------------------------------------------------------- */
+
+/*
+ * nictype.c32
+ *
+ * PXELINUX module that displays UNDI NIC bus type and optionally loads
+ * a config-file based on the PCI VENdor and DEVice IDs
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <console.h>
+#include <syslinux/pxe.h>
+#include <syslinux/boot.h>
+
+#undef Countof
+#define Countof(array) (sizeof (array) / sizeof *(array))
+
+static const char *nic_type_names[] = {
+ "Unknown",
+ "Unknown",
+ "PCI",
+ "PnP",
+ "CardBus",
+};
+
+static int usage(const char *prog);
+
+static const char prog_name[] = "nictype.c32";
+
+int main(int argc, char **argv)
+{
+ int status;
+ t_PXENV_UNDI_GET_NIC_TYPE nic_type_info;
+ char filename[] = "VVVVDDDD";
+
+ openconsole(&dev_stdcon_r, &dev_stdcon_w);
+
+ status = pxe_get_nic_type(&nic_type_info);
+ if (status == -1 || status != PXENV_STATUS_SUCCESS) {
+ fprintf(stderr, "pxe_get_nic_type failure\n");
+ goto err_nic_type_info;
+ }
+
+ /* Unknown NIC type? */
+ if (nic_type_info.NicType >= Countof(nic_type_names))
+ nic_type_info.NicType = 0;
+
+ printf("NIC type: %s\n", nic_type_names[nic_type_info.NicType]);
+
+ if (argc < 1 || argc > 2 || (argc == 2 && argv[1] &&
+ strncmp(argv[1], "--config",
+ sizeof "--config"))) {
+ status = usage(argv[0]);
+ goto err_usage;
+ }
+
+ if (argc == 1) {
+ status = EXIT_SUCCESS;
+ goto out;
+ }
+
+ if (nic_type_info.NicType != PCI_NIC) {
+ fprintf(stderr, "NIC type not supported for --config\n");
+ goto err_config_nic_type;
+ }
+
+ status = sprintf(filename, "%04X%04X",
nic_type_info.info.pci.Vendor_ID,
+ nic_type_info.info.pci.Dev_ID);
+ if (status != Countof(filename) - 1) {
+ fprintf(stderr, "Error constructing --config filename\n");
+ status = EXIT_FAILURE;
+ goto err_filename;
+ }
+
+ printf("Loading config-file '%s'...\n", filename);
+ syslinux_run_kernel_image(filename, "", 0, IMAGE_TYPE_CONFIG);
+ fprintf(stderr, "Failed to load config-file\n");
+ status = EXIT_FAILURE;
+
+ err_filename:
+
+ err_config_nic_type:
+
+ out:
+
+ err_usage:
+
+ err_nic_type_info:
+
+ return status;
+}
+
+static int usage(const char *prog)
+{
+ const char text[] =
+"Usage: %s [--config]\n"
+"\n"
+"--config will try to load a config-file with the name VVVVDDDD, where
VVVV\n"
+"is the PCI VENdor code and DDDD is the PCI DEVice code, both for the
NIC\n";
+
+ fprintf(stderr, text, prog ? prog : prog_name);
+ return EXIT_FAILURE;
+}
--
1.7.11.7
-------------- next part --------------
>From 2764e260e12d9769e3b699e4213b9a164e64924a Mon Sep 17 00:00:00 2001
From: Shao Miller <sha0.miller at gmail.com>
Date: Thu, 22 Nov 2012 20:43:25 -0500
Subject: [PATCH] nictype.c32: PXELINUX module to display UNDI NIC bus type...
...and optionally load a config-file based on the PCI VENdor and DEVice IDs.
Usage: nictype.c32 [--config]
--config will try to load a config-file with the name VVVVDDDD, where VVVV
is the PCI VENdor code and DDDD is the PCI DEVice code, both for the NIC
Signed-off-by: Shao Miller <sha0.miller at gmail.com>
---
com32/modules/Makefile | 3 +-
com32/modules/nictype.c | 115 ++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 117 insertions(+), 1 deletion(-)
create mode 100644 com32/modules/nictype.c
diff --git a/com32/modules/Makefile b/com32/modules/Makefile
index f110e58..10c6688 100644
--- a/com32/modules/Makefile
+++ b/com32/modules/Makefile
@@ -24,7 +24,8 @@ MODULES = config.c32 ethersel.c32 dmitest.c32 cpuidtest.c32 \
meminfo.c32 sdi.c32 sanboot.c32 ifcpu64.c32 vesainfo.c32 \
kbdmap.c32 cmd.c32 vpdtest.c32 host.c32 ls.c32 gpxecmd.c32 \
ifcpu.c32 cpuid.c32 cat.c32 pwd.c32 ifplop.c32 zzjson.c32 \
- whichsys.c32 prdhcp.c32 pxechn.c32 kontron_wdt.c32 ifmemdsk.c32
+ whichsys.c32 prdhcp.c32 pxechn.c32 kontron_wdt.c32 ifmemdsk.c32 \
+ nictype.c32
TESTFILES =
diff --git a/com32/modules/nictype.c b/com32/modules/nictype.c
new file mode 100644
index 0000000..b2a1c2a
--- /dev/null
+++ b/com32/modules/nictype.c
@@ -0,0 +1,115 @@
+/* ------------------------------------------------------------------------- *\
+ *
+ * Copyright 2012 Shao Miller <sha0.miller at gmail.com> - All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
+ * Boston MA 02110-1301, USA; either version 2 of the License, or
+ * (at your option) any later version; incorporated herein by reference.
+ *
+\* ------------------------------------------------------------------------- */
+
+/*
+ * nictype.c32
+ *
+ * PXELINUX module that displays UNDI NIC bus type and optionally loads
+ * a config-file based on the PCI VENdor and DEVice IDs
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <console.h>
+#include <syslinux/pxe.h>
+#include <syslinux/boot.h>
+
+#undef Countof
+#define Countof(array) (sizeof (array) / sizeof *(array))
+
+static const char *nic_type_names[] = {
+ "Unknown",
+ "Unknown",
+ "PCI",
+ "PnP",
+ "CardBus",
+};
+
+static int usage(const char *prog);
+
+static const char prog_name[] = "nictype.c32";
+
+int main(int argc, char **argv)
+{
+ int status;
+ t_PXENV_UNDI_GET_NIC_TYPE nic_type_info;
+ char filename[] = "VVVVDDDD";
+
+ openconsole(&dev_stdcon_r, &dev_stdcon_w);
+
+ status = pxe_get_nic_type(&nic_type_info);
+ if (status == -1 || status != PXENV_STATUS_SUCCESS) {
+ fprintf(stderr, "pxe_get_nic_type failure\n");
+ goto err_nic_type_info;
+ }
+
+ /* Unknown NIC type? */
+ if (nic_type_info.NicType >= Countof(nic_type_names))
+ nic_type_info.NicType = 0;
+
+ printf("NIC type: %s\n", nic_type_names[nic_type_info.NicType]);
+
+ if (argc < 1 || argc > 2 || (argc == 2 && argv[1] &&
+ strncmp(argv[1], "--config",
+ sizeof "--config"))) {
+ status = usage(argv[0]);
+ goto err_usage;
+ }
+
+ if (argc == 1) {
+ status = EXIT_SUCCESS;
+ goto out;
+ }
+
+ if (nic_type_info.NicType != PCI_NIC) {
+ fprintf(stderr, "NIC type not supported for --config\n");
+ goto err_config_nic_type;
+ }
+
+ status = sprintf(filename, "%04X%04X", nic_type_info.info.pci.Vendor_ID,
+ nic_type_info.info.pci.Dev_ID);
+ if (status != Countof(filename) - 1) {
+ fprintf(stderr, "Error constructing --config filename\n");
+ status = EXIT_FAILURE;
+ goto err_filename;
+ }
+
+ printf("Loading config-file '%s'...\n", filename);
+ syslinux_run_kernel_image(filename, "", 0, IMAGE_TYPE_CONFIG);
+ fprintf(stderr, "Failed to load config-file\n");
+ status = EXIT_FAILURE;
+
+ err_filename:
+
+ err_config_nic_type:
+
+ out:
+
+ err_usage:
+
+ err_nic_type_info:
+
+ return status;
+}
+
+static int usage(const char *prog)
+{
+ const char text[] =
+"Usage: %s [--config]\n"
+"\n"
+"--config will try to load a config-file with the name VVVVDDDD, where VVVV\n"
+"is the PCI VENdor code and DDDD is the PCI DEVice code, both for the NIC\n";
+
+ fprintf(stderr, text, prog ? prog : prog_name);
+ return EXIT_FAILURE;
+}
--
1.7.11.7
More information about the Syslinux
mailing list