[syslinux] Problem boot PXE UEFI on HP ML350 Gen9

[Gene Cumm]

On Thu, Mar 5, 2015 at 2:03 PM, Jorge Cisneros via Syslinux
<syslinux at zytor.com> wrote:
> Hi All,
>
>     My PXE configurations works fine for a bios PXE (the server in legacy
> mode) but hangs in an EUFI mode. Look like  it can transfer the bootx64.efi
> but not the next one ldlinux.e64
>
>
>   Any ideas?

My latest personally-published binaries.

git://github.com/geneC/syslinux.git
https://github.com/geneC/syslinux.git

Branch 1efipxe


https://sites.google.com/site/genecsyslinux/sl604p0g18-x64.tgz?attredirects=0&d=1
https://sites.google.com/site/genecsyslinux/sl604p0g18-bios.tgz?attredirects=0&d=1


> Thanks
>
>
> Software>
> syslinux ver 6.3
> atftp 7.1
>
>
> Log server side
>
>>> Booting Embedded LOM 1 Port 1 : HP Ethernet 1Gb 4-port 331i Adapter -
> NIC (PXE IPv4)
>
>>> Booting PXE over IPv4.
>   Station IP address is 10.1.136.65
>
>   Server IP address is 10.7.63.247
>   NBP filename is efipxe/bootx64.efi
>   NBP filesize is 188000 Bytes
>  Downloading NBP file...
>
>   NBP file downloaded successfully.
> Getting cached packet
> My IP is 10.1.136.65
>
> Log tftp side
>
> Mar  5 12:57:17 tuxdhcp dhcpd: DHCPOFFER on 10.1.136.65 to
> 9c:b6:54:b6:7d:f0 via 10.7.64.77
> Mar  5 12:57:20 tuxdhcp dhcpd: DHCPREQUEST for 10.1.136.65 (10.7.63.247)
> from 9c:b6:54:b6:7d:f0 via 10.7.64.77
> Mar  5 12:57:20 tuxdhcp dhcpd: DHCPACK on 10.1.136.65 to 9c:b6:54:b6:7d:f0
> via 10.7.64.77
> Mar  5 12:57:20 tuxdhcp atftpd[29200]: Serving efipxe/bootx64.efi to
> 10.1.136.65:1436
> Mar  5 12:57:20 tuxdhcp atftpd[29200]: Serving efipxe/bootx64.efi to
> 10.1.136.65:1437
> Mar  5 12:57:20 tuxdhcp atftpd[29200]: Serving efipxe/ldlinux.e64 to
> 10.1.136.65:1438
> Mar  5 12:57:21 tuxdhcp atftpd[29200]: Serving efipxe/ldlinux.e64 to
> 10.1.136.65:1438
> Mar  5 12:57:22 tuxdhcp atftpd[29200]: Serving efipxe/ldlinux.e64 to
> 10.1.136.65:1438

Looks like the usual.

-- 
-Gene