[syslinux] FW: pxelinux 5.x, 6.x memtest problem

[Ady]

> Hi,
> 
> OK. I build syslinux-6.02-pre6 from
> https://www.kernel.org/pub/linux/utils/boot/syslinux/Testing/6.02/syslinux-6.02-pre6.tar.gz
> on a Debian jessie/sid system (with gnu-efi_3.0u+debian-2 from
> experimental):
> 
> root at jessie: ~# cd /tmp
> root at jessie:/tmp# wget
> https://www.kernel.org/pub/linux/utils/boot/syslinux/Testing/6.02/syslinux-6.02-pre6.tar.gz
> root at jessie:/tmp# tar xfz syslinux-6.02-pre6.tar.gz
> root at jessie:/tmp# cd syslinux-6.02-pre6
> root at jessie:/tmp/syslinux-6.02-pre6# make bios &> ~/build.log
> root at jessie:/tmp/syslinux-6.02-pre6# make install &> ~/install.log
> root at jessie:/tmp/syslinux-6.02-pre6# cd /tmp/
> root at jessie:/tmp# mkdir new-syslinux
> root at jessie:/tmp# cd new-syslinux/
> root at jessie:/tmp/new-syslinux# cp /usr/share/syslinux/*.c32 .
> root at jessie:/tmp/new-syslinux# cp /usr/share/syslinux/pxelinux.0 .
> root at jessie:/tmp/new-syslinux#
> 
> I transfered "new-syslinux" to my tftp-host (I replaced my working
> syslinux-5.10 installation).
> 
> I rebooted a client (HP DL120 G7 system) and expected to see my
> pxeboot menu like before, but nothing happen.
> 
> tftp-host # cat /srv/tftp/pxelinux.cfg/default
> DEFAULT menu
> PROMPT 0
> MENU TITLE PXE Menu
> TIMEOUT 100
> TOTALTIMEOUT 6000
> ONTIMEOUT local
> 
> LABEL local
> 	MENU LABEL (local)
> 	MENU DEFAULT
> 	LOCALBOOT 0
> 
> LABEL Memtest86+ 4.20
> 	MENU LABEL Memtest86+ 4.20
> 	KERNEL memtest/420/memtest
> 
> LABEL Sysresccd x86-64 3.7.0
> 	MENU LABEL Sysresccd x86-64 3.7.0
> 	KERNEL sysresccd/370/altker64
> 	append initrd=sysresccd/370/initram.igz dodhcp=eth0 nonm nodmraid
> nomdadm scandelay=3 vga=791
> netboot=http://10.82.0.1/images/sysresccd/370/sysrcd.dat
> 
> 
> (This cfg was working, excepted the Memtest86+ part, with syslinux-5.10)
> 
> 
> Build logs and network capture can be found here:
> https://www.dropbox.com/s/ekoth8nqdejk5iz/syslinux-6.02_pre6-logs.tar.bz2
> 
> 
> 
> -- 
> Regards,
> Igor
> _______________________________________________
 
Hi Igor,

May I suggest, for these tests, not to re-build each pre-release? 
Instead, if at all possible, just use the official binaries already 
included in the downloaded file.

Regarding your /srv/tftp/pxelinux.cfg/default content, have you 
pasted all of it in your previous email?

Note that you used "DEFAULT menu", but there is no "menu" label. 
Perhaps your intention was "DEFAULT menu.c32"?

Regards,
Ady.