[syslinux] syslinux PXE boot version upgrade, network no longer working

[David McDowell]

My “default” was just a sample to prevent further tl;dr :)

Right, by 2014 I meant 6.03. I didn’t notice in the docs this was a known issue. If keeppxe is a bug with 6.03, that’s likely my issue. Do I drop back to 6.02 or X? Which version?

Thanks,
David

Sent from my iPhone

> On Feb 1, 2018, at 6:53 PM, Ady Ady via Syslinux <syslinux at zytor.com> wrote:
> 
> 
>> Hardware with issue is a Lenovo T410 (circa 2007?):
>> 
>> SysLinux PXE boot (pxelinux.0) version 2009 - PXE boot works, select
>> Ghost from PXE menu, PC-DOS loads, Ghost.exe runs and networking is
>> working for Ghostcast/peer to peer.
>> 
>> SysLinux PXE boot (pxelinux.0) version 2014 - PXE boot works, select
>> Ghost from PXE menu, PC-DOS loads, Ghost.exe runs and networking is
>> NOT working for Ghostcast/peer to peer.
>> 
>> The PC-DOS has a universal network driver (UNDI) 11.1 (boot disk made
>> from Ghost 11.5 Book Disk Wizard).
>> 
>> My "default" file configuration and .ima floppy disk image are
>> identical in both environments:
>> 
>> DEFAULT menu.c32
>> PROMPT 0
>> TIMEOUT 300
>> MENU TITLE PXE Boot Menu
>> LABEL Ghost
>> MENU LABEL ^Ghost
>> MENU IMMEDIATE
>> KERNEL memdisk
>> APPEND keeppxe floppy rw initrd=bootimages/ghost.ima
>> 
>> My TFTP is identical in both environments:
>> TFTPD64 v4.60 Build Jan 28 2017 18:55:26 (Service Edition)
>> 
>> Only difference is the version of SysLinux (pxeconfig.0 and its
>> corresponding files from 2009 version: menu.c32, memdisk and in the
>> 2014 version add ldlinux.c32).  I have tried with and without
>> "keeppxe" in the APPEND line.
>> 
>> Interesting side note: Lenovo T420 works in both environments,
>> networking loads (as do many other models)
>> 
>> Ideas?
>> thanks,
>> David
> 
> 
> I am guessing that "keeppxe" is needed.
> 
> Although versions "2009" and "2014" are not really "versions", "2014" is 
> probably version 6.03, which is still/yet not supporting "keeppxe". This is a 
> known problem.
> 
> BTW, for menu.c32 "2014" you should also need its corresponding libutil.c32 
> (although, if your "default" file only has one entry, then menu.c32 is useless; 
> i.e. the menu won't show up anyway).
> 
> You could try the binaries from Debian's "experimental" repo (replace _all_ of 
> them, not just pxelinux.0). Feedback is appreciated.
> 
> 
>> _______________________________________________
>> Syslinux mailing list
>> Submissions to Syslinux at zytor.com
>> Unsubscribe or set options at:
>> http://www.zytor.com/mailman/listinfo/syslinux
> 
> 
> 
> _______________________________________________
> Syslinux mailing list
> Submissions to Syslinux at zytor.com
> Unsubscribe or set options at:
> http://www.zytor.com/mailman/listinfo/syslinux